ALEXA 35 Housing Setup
Page 28
Housing Closure
✓
General. The Rear Shell slides from the rear, over the camera and mates with
the Mid Shell. If there is obstruction at any time during this process
– stop! –
remove the shell and locate the obstruction.
✓
Mate the shell. Position the shell at the rear and gently move forward over the
camera to mate with the Mid Shell.
✓
CAUTION: AVOID OBSTRUCTIONS.
The Rear Shell should slide freely,
without obstruction. If obstructions or resistance are encountered, stop. Remove
the camera, find the cause of the obstruction, and try again.
✓
Latches. Once properly mated, secure the 3 latches. Verify that the two shells
are mated evenly and consistently around the sealing line of the housing.
