PAGE 4
GX53HDM
INSTRUCTION MANUAL
INSTALLATION
Installation diagram
The video signal is transferred from the camera to the mirror monitor via an RCA cable that will need
to be run through the boot, through the passenger compartment to the mirror monitors wired loom run
under the dash. From there the power and video signals are sent directly to the monitor. At the rear of
the car the camera is powered directly from the reversing tail light. Priority is the AV2 input.
F
F
F
M
F
F
Moulded
splitter
M
Powerwires
(ACC)
+
M
M
5.5 Metres
32 CM
170cm
(Optional front camera)
Mirror Monitor
AV2
AV2
AV1
AV1
(Blue wires canbe used for additional accessories )
Earth
Earth
Earth
0.5 Metres
0.5 Metres
(Red Camera Power Reversing light)
(Red Camera Power Reversing light)
(NOTE: This configuration is used for CANBUS vehicles to filter unwanted video noise. )
CANBUS
Filter
Camera
F
