Copyright Gatekeeper Systems 2011
Page 8 of 9
Rev 2.0
Figure 6 – Aiming Geometry For Front Facing Cameras
SP-100 and SP-210 Image Orientation
The SP-100 is shipped for installation facing the rear of the bus. If The SP-100 is mounted facing
forward the image will be inverted. Therefore mount the SP-100 facing the rear of the Bus.
The orientation of the image can be changed in the SP-210. This is required whether the camera is
aimed forwards or backwards. The camera cylinder (inside the SP-210) has a collar secured around
the camera. The collar is attached to the camera cylinder with the middle bolts. See Figure 7. The two
outside bolts secure the collar to the SP-210 mounting base. In order to correctly orientate the image
correctly remove the collar from the mounting base. This is done by removing the two outside bolts.
Flip the camera over and reattach the collar to the mounting base using the bolts.
SP-210 cameras will ship with the correct orientation. However if the orientation needs to be changed,
because the image is upside down, follow the above procedure.
