33
TEMPERATURE.
If Temperature is enabled in the configuration of the 816-HD and the
ALARM setting has been set to ON, the output can be viewed as part of the
Device Status within G4 viewer, or, by selecting Event Files within the
Recorded Video menu option.
CAMERA
Motion Detection and Blind are not currently supported.
With Video Loss enabled, if there is a problem with the video feed from
the camera the 816-HD will detect this. With VL Enabled and Alarm set
to ON when there is Video Loss detected the OSD will display an Alarm
warning.
The VLOSS led on the front of the 816-HD will also be illuminated if
video loss occurs. Please note that if no cameras are physically
connected to the 816-HD but the corresponding channels have been
Enabled, VLOSS will display on the OSD; Recorded Video, and is set, the
alarm will be displayed.
VOLTAGE
Low Voltage Protection is OFF by default. If Enabled Highs; Lows and
Measurements in-between will be displayed as part of the Device Status
within G4 viewer.
EMERGENCY EVENT.
Determines if the Driver Alert Button will activate an alarm when pressed
by the driver of the vehicle. If Alarm is set to ON a marker will appear as
part of the OSD and video playback file. EXT.COM must also be configured
for Emergency Event to be recorded.
LOCK sets if the video file produced will be overwritten when the
COMRAD™ has reached its capacity.
Figure 17: Emergency Event.
