11
Rear View.
Figure 2: 816-HD Rear View.
1.
Power supply for the integrated base fan.
2.
GPS connector for a GPS enabled 816-HD.
3.
USB Connection. Reserved for future development.
4.
Wi-Fi connector for a Wi-Fi enabled 816-HD.
5.
Sensor (CAB000323) connection.
6.
CAN1. Reserved for future development.
7.
3G connector for a Cellular enabled 816-HD.
8.
Cameras 9 to 16 fly lead connector.
9.
Cameras 1 to 8 fly lead connector.
10.
ICD (optional extra) connector.
11.
LAN connector.
12.
Power Cable (CAB000333) connector.
Mounting the System.
Installation / Environmental Requirements.
The 816-HD has an operating temperature range of -40° C to +65° C. It is good practice to ensure that the 816-HD is mounted in
an area in which acceptable temperature ranges are experienced. Please fully read and understand the following conditions to
ensure the Warranty will not be voided.
1.
The 816-HD operates between 8V ~ 36V. Please ensure a regulated, consistent power source is available for the 816-HD.
2.
DO NOT remove any enclosures/covers associated with the 816-HD as this will void the warranty.
3.
Remove the In-Line Power fuse prior to jump starting the vehicle.
4.
Select a solid ground connection for the 816-HD.
5.
Do Not use any third party accessories, unless approved by Gatekeeper Systems.
6.
The 816-HD is designed for interior use only. Do not install in areas which are exposed to excessive moisture / wetness.
7.
Mount 816-HD in a location which has good air-flow and is not subject to excessive heat/cold variations. Allow at least 6” of
clearance all round for effective cooling of the system.
8.
Ensure that the 816-HD is mounted where it is not easily accessible by non-authorized personnel.
9.
Ensure that ALL provided Split Looms are used around exposed cables. Grommets are to be used as directed by install sheet.
Failure to use provided Split Looms and Grommets will void the warranty.
10.
Gatekeeper Systems provides Tek Screws with which to mount the 816-HD, these have been tested and are approved for
mounting.
