GM720A-YF A
/C Service Station
7
D-2:
Set the adding amount.
D-3:
Press the ENTER key to start.
9) Recharging
A
、
Select the Recharging Function
and press the ENTER key.
B
、
Set the recharge amount.
C
、
Press the ENTER key to start.
D
、
When finished, it’ll stop automatically.
Note: The recharging amount setting as following.
Method 1: Set the amount directly.
Method 2: Set the amount by the database. Steps as following:
Note: In the recharging process, if shows the menu, it means
that you need to turn on the car air-conditioning to complete
the recharging process. Later, you should supply new
refrigerant into the tank.
10) Auto. Mode
A
、
Under this mode, all of the functions can be run full automatically after setting the parameters.
B
、
Before running, must drain out the used oil entirely and fill enough new oil into the new bottle.
C
、
Operations:
C-1: Select the Auto. Mode Function
and press the ENTER key.
C-2: Set the all parameters.
C-2: Press the ENTER key to start.
D
、
When finished, it’ll stop automatically.
Press
key
ENTER
