BOMBEX® FARUMY®
Indoor space treatment – cold and hot fogging
BOMBEX Water* Surface
Cold fogging
100 mL
5 L
500 m
³
Hot fogging
100 mL
-
500 m
³
Apply through thermal fogging equipment, cold aerosol generating ultra low volume (ULV)
equipment, fan assisted rotary atomiser and hand-held or knapsack sprayers which are
designed for space spraying. Spray into the air around the areas to be treated paying par-
ticular attention to sites where insects rest and breed or harbourages.
Close windows and doors prior to application and keep closed for at least 1 hour. Switch
off all electricity and air-conditions. Keep away all animals and persons during applica-
tion. Adapt the application to the time when the target insect is the most active. After the
application ventilate the treated area for at least 4 hours or use an air exhauster (1200
m
³
/h rate) to ventilate rooms. Before entering the treated area the spray should be dried
completely.
Wear suitable glove, coveralls and boots plus eye protection when diluting.
Do not breathe gas/fumes/vapour/spray. Otherwise wear a full-face protection with self-
ventilated breathing mask and eye protection.
Respiratory protection is recommended at re-entry after fogging.
Important: Read before use
Read the entire Directions for Use, Conditions, Disclaimer of Warranties and Limitations of
Liability before using this product. If terms are not acceptable, return the unopened product
container at once. By using this product, user or buyer accepts the following Conditions,
Disclaimer of Warranties and Limitations of Liability.
Conditions
The directions for use of this product are believed to be adequate and must be followed
carefully. However, it is impossible to eliminate all risks associated with the use of this
product. Crop injury, ineffectiveness or other unintended consequences may result because
of such factors as weather conditions, presence of other materials, or the manner of use or
application, all of which are beyond the control of GAT Microencapsulation GmbH. All such
risks shall be assumed by the user or buyer.
Disclaimer of warranties
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, GAT MICROENCAPSULATION GMBH
MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR OF
FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, THAT EXTEND BEYOND THE STATE-
MENTS MADE ON THIS LABEL. No agent of GAT Microencapsulation GmbH is authorized to
make any warranties beyond those contained herein or to modify the warranties contained
herein.
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, GAT MICROENCAPSULATION GMBH
DISCLAIMS ANY LIABILITY WHATSOEVER FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT.
Limitations of liability
TO THE EXTENT CONSISTENT WITH APPLICABLE LAW, THE EXCLUSIVE REMEDY OF THE USER
OR BUYER FOR ANY AND ALL LOSSES, INJURIES OR DAMAGES RESULTING FROM THE USE
OR HANDLING OF THIS PRODUCT, WHETHER IN CONTRACT, WARRANTY, TORT, NEGLI-
GENCE, STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE PURCHASE PRICE PAID,
OR AT GAT MICROENCAPSULATION GMBH’s ELECTION, THE REPLACEMENT OF PRODUCT.
Clean surfaces prior to application. The surfaces should be dry before applying the product.
Apply the product as a fine mist with low pressure; treat surfaces thoroughly but not till runoff.
Pay particular attention to cracks, crevices and places where insects harbourages.
* The needed water content may vary de-
pending on surface condition and applica-
tion equipment.
Note to physician
This product contains pyrethroid insecticides. Treat symptomatically. For comprehensive
medical advice on the treatment of poisoning, contact the nearest Poisons Information Cen-
tre. Never give anything by mouth to an unconscious person. Do not induce vomiting.
PROFESSIONAL INSECTICIDE - PT18
USE INSECTICIDE SAFELY. ALWAYS READ THE LABEL AND PRODUCT INFORMATION BEFORE USE.
