Gastros InductWarm 140, Оригинальное руководство пользователя

Страница: 25 / 56

25
Using the infrared remote control (optional): The power level can optionally be set with the infrared
remote control. To do this, the remote control must be held close (approx. 20-30 cm / 8- 12”) to the infrared
receiver of the external control panel or directly to the internal panel of the device.
The InductWarm
® 140 built-in device has four different power levels that cover different temperature ranges. The
final temperature inside the dish depends on the following factors:
•
Quality of the material of the dish (e.g., flat bottom)
•
Quality of the inductive layer of the dish
• Consistency of the food and surrounding temperature
•
Size of the dish
•
Position of the dish on the induction unit
The InductWarm
® 140 built-in device has integrated dish detection to ensure that the induction unit is active
only when there is a dish placed on the device. If the InductWarm ® 140 device detects a dish, the selected power
level is displayed. If the vessel is removed, the InductWarm
®
140 system detects this and switches off the
induction. This is indicated by the button of selected power level 1, 2, 3 or 4 with flashing blue backlighting. If a
vessel is placed back onto the device within 10 minutes (standard setting), the InductWarm
® 140 continues to
heat at the previously selected level. All inductive dishes can be used with the InductWarm ® 140 unit.
The InductWarm
® 140 built-in device has an integrated temperature protection feature . If the coil
temperature inside the device reaches the pre-set maximum temperature of 90 °C/194 °F on level 4, the device
automatically resets to level 3. If the temperature rises by another 5 °C / 41 °F despite this initial safety measure,
the device switches off for safety reasons (standby mode). This shutdown serves to protect the dishes and the
buffet. The InductWarm
® 140 can only be operated again when the coil temperature has dropped below the
threshold described above (the device must be restarted manually after the temperature drops below 90 °C /
194 °F, and this can take a few minutes).
Control panel display Function
ON/OFF button lights up red Device is supplied with power
ON/OFF button lights up green Device is running in standby mode
Power level button 1 lights up blue Power level 1 is activated
Power level button 2 lights up blue Power level 2 is activated
Power level button 3 lights up blue Power level 3 is activated
Power level button 4 lights up blue Power level 4 is activated
Selected power level button 1, 2, 3 or 4
is flashing blue There is no dish on the device or
the dish is not detected