Gastrorag DK100, Инструкция по эксплуатации

Страница: 7 / 28

EN
7
indicating that the appliance is turned on.
switch. At the same time, the boiling indicator should light up,
5. Connect the appliance to the supply system using the power
4. Turn on the power (plug in the power outlet).
while making coffee.
heating element. Close the infuser with a lid. Do not remove the lid
the water pipe in the tank so that the base of the tube fits inside the
3. Insert the water pipe into the infuser. Install the coffee basket with
basket by at least 1 inch.
basket.The coffee level should be below the edge of the coffee
distributed over the filter. Do not put too much coffee in the coffee
into thefilter of the coffee basket. Coffee should be evenly
2. Pour 2/5 ounces of medium-ground coffee or 1/5 ounces of tea
readings.
of the tank can be monitored with the help of the measuring glass
The water level must not exceed the maximum level. The filling level
the volume of the tank (see the section Technical Specifications).
the tank with hot water. The volume of water should be at least half
tank. Fill the tank with cold drinking water. It is not allowed to fill
1. Remove the lid. Remove the infuser and water pipe from the water
BREWING COFFEE/TEA
Turning on the appliance
Maintenance and Care section.
3. Clean this appliance in accordance with the instructions in the
protective film from the stainless steel surfaces.
2. Remove the accessories from the packaging. Remove the
of 25-35 inches with a flat horizontal surface.
1. Unpack the appliance and place it on a stable stand with a height
Before first use
Turning on the appliance