Gastrorag DK04B, Инструкция по эксплуатации

Страница: 7 / 28

EN
7
inside the heating element (heating cup).
tube in the body of percolator so that the base of the tube fits
part of the water pipe, install the coffee filter with the percolation
3. Insert the water pipe into the coffee filter. By holding the top
coffee filter by at least 4/5 inches.
the coffee filter. The coffee level should be below the edge of the
be evenly distributed over the filter.Do not put too much coffee in
grinds may sift through the holes of the coffee filter! Coffee should
grind designed for percolator coffee, or use a coarse grind. Finer
from sifting through the holes in the coffee filter,be sure to use a
amount of coffee to suit your taste. To prevent small coffee grounds
water into the coffee filter. For stronger or milder coffee,adjust
2. Pour 2/5 ounces of medium-ground coffee per 20 fl oz (4 cups)of
percolator.
be monitored by means of the measuring markers inside the body of
must not exceed the maximum level. The filling level of the body can
drinking water. Do not fill the body with hot water! The water level
the water pipe from the appliance body. Fill the body with cold
1. Remove the lid. Remove the coffee filter along with its cover and
Turning on the appliance
instructions in section "Cleaning and maintenance".
3. Cleaning and maintenance is carried out in accordance with the
protective film from the stainless steel surfaces.
2. Remove the accessories from the packaging. Remove the
of 25-35 inches with a flat horizontal surface.
1. Unpack the appliance and place it on a stable stand with a height
BEFORE FIRST USE
Know your percolator
Turning on the appliance