7. Cleaning
7.1. device
•
Switch o
ff
the device, press the on / o
ff
button
•
Open the drain cock and drain the water into the sewer system.
•
The basin is cleaned by boiling water with a degreasing detergent in the device. Descalers can also be
used with the pasta cooker. Only
fi
ll with water up to the maximum water level.
•
Switch the device o
ff
again. Press the on / o
ff
button
•
Remove the heating element. (according to point 9.2) With standard models, pull up the heater and turn
it.
The pasta cooker is ready for the next use again! All sheets are made of stainless steel and can be treated with a
commercially available chrome steel cleaner.
7.2. Heating elements
Daily cleaning of the heater protects the device and the performance of the heater is maintained.
7.2.1.
Standard heater and pasta cooker
The heating element can be pulled out and rotated. The di
ff
erence to the 2nd generation is that these are not
removed.
•
• Switch o
ff
the pasta cooker. Press
.
•
Empty the basin. There must be no contents (oil, fat or cleaning water!) In the cooking basin.
•
Let the heater cool down to 35 ° C (hand warm).
•
Pull out the heater and turn it slightly to the left.
•
The basin can now be cleaned
Note:
•
If the heater is not inserted or not inserted correctly, the device cannot be switched on or operated.
7.3. Hazard warnings
•
Under no circumstances should the pasta cooker be operated without water. If the level falls below the
lowest level, there is a risk of
fi
re!
•
The heater must not be removed during operation.
•
In the event of a
fi
re, the device cover must be used for
fi
re
fi
ghting. In the event of
fi
re, put the lid on the
basin immediately! Turn o
ff
the main switch and pull out the power plug!
•
Risk of splashing and burns.
•
Moving the pasta cooker is not permitted! Likewise, taking out the collecting container
fi
lled with hot
water. Let the water cool down to at least 50 ° C.
11_Operation manual Pastacooker Gastro 8 V1_3_e
Page
of
Rorschach, 19.03.2018
16
19
