5.4. Programming the various programs
5.4.1.
Filling with fresh water
The machine must be switched o
ff
to program the
fi
lling. Now the
button can be held down for 10 seconds.
The
fi
lling switches on. Learn to
fi
ll appears on the display. Now you have to wait until the basin is full.
By pressing the
fi
ll
button again, the amount is set and saved.
5.4.2.
Programming the time with pasta cooker (I, II, III und IV)
Press the program buttons I
/ II
/ III
for at least 10 seconds each time.
The time to be set appears on the display.
Set the time with the buttons
and
.
Press program buttons I
/ II
/ III
each time again.
The respective program is now programmed over time and can be used.
5.5. Temperature settings
The target value of the temperature can be increased with the key
and decreased with the key
.
As long as the value is
fl
ashing, the speci
fi
ed temperature has not been reached.
5.5.1.
Query current temperature
Press the plus
and minus
buttons at the same time.
The current measured temperature is displayed. The measurement is carried out with a PT-1000 and has an accu-
racy of +/- one degree Celsius.
5.6. Cooking pasta
•
Press the on / o
ff
button
.
•
Set the thermostat to the desired temperature.
•
The set target temperature
fl
ashes. Machine is heating.
•
As soon as the temperature is reached, the
fl
ashing stops.
•
Put pasta in the basket.
•
Place the basket in the water basin.
•
As soon as the pasta has reached al dente, lift the basket and hang it on the hanger to drain.
5.7. Restart the control
In order to restart the control, the buttons
and
must be pressed simulaneously.
11_Operation manual Pastacooker Gastro 8 V1_3_e
Page
of
Rorschach, 19.03.2018
11
19
