24
OPERATION
BEFORE FIRST USE
Remove all promotional materials and packing as well as any foreign objects, but
do not remove the model label.
Before first use and after a long period of storage, clean the citrus juicer with a damp
soft cloth and warm soapy water (see Care and Cleaning).
ASSEMBLING THE JUICER
CAUTION:
Before you plug in the juicer, always ensure that the appliance is
assembled correctly and, that there are no foreign objects in the filter basket or jui-
ce container.
1. Lift off the dust cover.
2. Unwrap the power cord from the cord storage under the bottom of the motor
base. Place the appliance on a sufficient surface (see Safeguards for Daily
Operation).
3. Place the juice container on the motor base. The spout settles in the cut out of the
motor base.
4. Insert the filter basket in the juice container. The upper edge of the filter basket
may not protrude the brim of the juice container and the rotor shaft sticks out of
the centre of the filter basket.
5. Place the juice cone on the rotor shaft.
Important:
If food dried on the rotor shaft or in the interior of the juice cone, you
may find it difficult to mount the juice cone. Do not use any violence, but clean the
surfaces of the rotor shaft and juice cone first, before assembling the appliance
(see Care and Cleaning).
CAUTION:
Do not use any hard or sharp utensils or abrasive cleaners for clea-
ning. Handle with care to avoid damage. With the juice cone installed, the appli-
ance is ready for use.
