26
CAUTION:
Do not to overfill the juice container.
Close the spout: lift the spout upwards until it settles with a click.
Empty the juice container: Place a suitable vessel under the spout and gently push
down the spout to open the seal and empty the juice container.
5. The motor stops automatically when the fruit is removed from the juice cone. You
may process another fruit half beginning with step 4.
WARNING:
Always unplug the appliance, before removing the pulp from the
filter basket or disassembling the appliance or moving the appliance.
CAUTION:
Do not use hard or sharp utensils to remove the pulp. Do not
scratch or scrape in the filter basket to avoid damage.
6. Do not allow the filter basket or juice container to overfill, because this may pre-
vent proper operation of the juicer or cause damage. Regularly interrupt juicing
and unplug the appliance. If the filter basket is not blocked, use a wooden or
plastic teaspoon to empty the filter basket. Otherwise lift off the juice cone, filter
basket and juice container and rinse with running water (see Care and Cleaning).
Also rinse the filter basket and juice container, if you wish to pause for a while.
CAUTION:
Do not operate the appliance continuously. Interrupt juicing for
some minutes to let the motor cool down.
7. Before removing the jug or cup from the spout, gently lift the spout until it settles
with a click to seal the juice container. This will keep your table or counter clean
and dry.
8. After juicing is complete: Never leave any food dry up on the appliance or any
parts of it. Empty the juice container and filter basket and clean the appliance
(see Care and Cleaning).
