Gastroback Fleischwolf Pro, Руководство пользователя

Страница: 29 / 48

29
Should this inadvertently happen, all parts must be completely dry before
the appliance is used again.
Never let water or other liquids run into the motor block.
Never clean the power cord or the appliance in the dishwasher, poor
liquids over the appliance or douse or dip it in water or other liquids.
In case that water or other liquids ran into the appliance while operating
turn off the appliance immediately, pull the plug and dry the appliance
with a clean cloth (›Care and cleaning‹).
Do not use the appliance in moist and wet areas.
Check the power supply cable regularly for wear and damage.
The mincer must only be connected to a 220-240 V power supply.
Always disconnect the power supply cable from the mains before assem-
bling, dismantling and cleaning the appliance or before exchanging min-
cing plates.
Always unwind the power cord completely before installing the appli-
ance.
Place the appliance close to a power point and connect it directly wit-
hout using any extension cords to avoid additional risks of injury through
fire or voltage.
Only install the appliance in proper form secure grounding receptacle
with adequate electric power supply (alternating current; 220-240 V, 50
Hz) and ground fault circuit interrupter. The maximum power consumpti-
on of the appliance is 1,000 Watt. You should also install a fuse with a
release current of maximum 30mA. If necessary ask your electrician for
help.
Never pull, rip, bend, clamp, squish or knot the power cord.
Pay atten-
tion to the power cord not hanging of the table. Attend to nobody get-
ting caught in loops of the line cord or pulling the appliance of the work
space. When pulling the plug always catch hold of the enclosure of the
plug.
Carry the appliance with both hands by the motor block – never by the
filling pan or the mincer.