WARNING:
Make sure the appliance is com-
pletely assembled and that there are nor foreign
objects in the feed chute before putting the plug
into the power point.
Never
put fingers, wooden spoons or other for-
eign substances (such as hair, clothing, brushes,
cloth) into the feed chute.
Always turn the appliance off and wait for the
motor to stop moving before removing the lid of
the juicer.
Keep the working place clean and dry. Do
not
let any liquids or water run into the motorblock
Do
not
put any cloth or napkins underneath
the appliance to avoid endangering by fire and
voltage. In case that water or other liquids ran
into the motorblock while operating turn off the
appliance immediately, pull the plug and dry
the appliance with a clean cloth. Operate
according to the instructions ´Trouble shooting
guide`
Step1:
Wash your selection of fruit and vegetables
before juicing.
NOTE: Most fruit and vegetables such
as small apples, carrots and cucumber
will not need to be cut to size as these
will fit into the feed chute whole. When
juicing carrots place the tip of the carrot
into the feed chute last.
Step 2:
Ensure the Easy Juicer is correctly assembled.
Ensure the stainless steel filter is thoroughly cleaned
before each use (refer to ´Care and cleaning`).
Ensure you place the juice jug with lid fitted (or
glass) under spout before commencing juicing.
Step 3:
Plug the power cord into a 230/240V power
outlet and turn the power ‘ON’. Push the
‘ON/OFF’ button to ‘ON’.
Step 4:
With the motor running, place food into the
9
Operating your Gastroback Easy Juicer
!
!
!
!
feed chute. Using the food pusher, gently
guide food down the feed chute. To extract the
maximum amount of juice, always push the
food pusher down slowly.
NOTE:
In case that the appliance slows down,
stumbles or stops all of a sudden turn off the
appliance immediately and pull the plug to
avoid overheating. Operate according to the
instructions ´Trouble shooting guide`.
WARNING:
Never use fingers to push food
down the feed chute or to clear the feed chute.
Always use the food pusher provided.
Step 5:
Juice will flow into the juice jug and the separated
pulp will accumulate in the integrated pulp
container.
NOTE:
When the integrated pulp container is
full of pulp, it must be emptied before continuing
to juice. (Refer to disassembling instructions).
Reassemble machine to continue juicing.
Slowly push
down the food
pusher to get the
most profitable
amount of juice
!