Trouble shooting guide
13
Possible problem
Easy solution
Machine will not work when
switched ´ON´
Motor appears to stall when
juicing
Excess pulp building up in
the micro mesh filter basket
Pulp too wet and reduced
extracted juice
Juice leaks between the rim
of the juicer and the cover
of the filter
Bowl surround juice sprays
out from spout
Juicer makes loud noise
when turned on
No juice coming out while
juicing
The safety locking arm may not be correctly engaged in the
vertical operating position with the locking arm located into
the two grooves on either side of the juicer cover).
Wet pulp can build up under the cover if the juicing action
is too vigorous. Try slower juicing action by pushing the
food pusher down more slowly. Clean the integrated pulp
container, the stainless steel filter basket and the juicer
cover.
Stop the juicing process. Remove the juicer cover, scrape off
pulp. Re-assemble and begin juicing again. Try alternating
(soft and hard) vegetable and fruit varieties.
Try a slower juicing action by pushing the food pusher
down more slowly. Remove stainless steel filter basket and
thoroughly clean mesh walls with the nylon brush. Rinse the
stainless steel filter basket under hot water. If the fine mesh
holes are blocked, soak the stainless steel filter basket in a
solution of hot water with 10% lemon juice to unblock the
holes or wash in the dishwasher. This will remove excess
fibre build up (from fruit or vegetables) which could be
inhibiting the juice flow.
Try a slower juicing action by pushing the food pusher
down more slowly. Fruit and vegetables with a high water
content (tomatoes and watermelon) should be juiced on low
speed.
Try a slower juicing action by pushing the food pusher
down more slowly.
Filer basket is not properly snapped into position. Turn the
On/OFF button to OFF. Turn the power OFF. Disassemble
the Easy Juicer (refer to ´disassembling`). Re-assemble (refer
to ´assembling`).
Check that the spout is not blocked with pulp. Refer to ´Care
and cleaning`.
