EN
45
will change to yellow and the kettle will keep the water at the set temperature for
30 minutes. Thereafter, the appliance will switch off the heating elements and
return to standby mode with a beep. The ON/OFF button gets dark.
NOTE
You may cancel the operating cycle at any time by removing the kettle from the
power base, or by pressing the ON/OFF button. Do not leave the keep warm
function run uselessly to avoid excessive energy consumption.
After being idle for approx. 30 minutes (ON/OFF button is dark), the kettle will shut
off completely and the display gets dark. Simply press any button to switch on the
display again.
WARNING
– Hot water and steam could cause severe injuries and dama-
ge! Always pour out hot water with special care and ensure not to spill the water
or get scalded by the steam.
10. Carefully pour the hot water. With the water boiling, always wait some seconds
for the water to stop boiling. Do not leave the water within the kettle uselessly,
to avoid excessive build-up of scale.
