EN
43
WARNING
– Always ensure that the appliance and all its parts and acces-
sories are
out of reach of young children
. The appliance is intended for heating
clear drinking water via electrically powered heating elements. Do not attempt to
heat the kettle by any other source of heat. Do not fill in any other beverages, food,
or any foreign liquids for operation to avoid injuries and damage due to overhe-
ating, fire, electric shock, and high temperatures. Improper use or misuse may
cause severe injuries and damage. Unplug the appliance and leave it cool down
completely, before cleaning the appliance, and when the appliance is not in use.
Do not leave the power base unattended while connected to the power supply.
Always unplug the power base when the appliance is not in use.
Before operation, ensure that there are no leaks in the kettle. If water runs out during
operation, immediately unplug the appliance (see: ‚Solving Problems‘). Regularly de-
scale the kettle (see: ‘Care and Cleaning’). Do not use violence.
Ensure to place the appliance on a level, flat, stable, and dry surface. For operation,
do not place the appliance near the edge of the working space or on inclined sur-
faces. Do not operate the appliance in a tray or tub or on a metal surface to avoid
high risk of electric shock, when overflow or splashing of hot water occurs. To avoid
overheating, before operation, always fill a sufficient amount of clear drinking water
into the kettle (at least 0.5 litres / MIN). Always remove the kettle from the power
base and wait until the kettle cooled down, before filling the kettle. Do not operate
the appliance with the kettle empty. However, Do not fill in more than the maximum
amount (1.7 litres / MAX). If the kettle is overfilled, boiling water may splash out.
Always ensure to hold the kettle level, when it is filled. Do not leave water in the kettle
after use, to avoid excessive build-up of scale.
1. Place the power base on a suitable table or counter near an appropriate wall
power outlet.
2. Remove the kettle from the power base and open the lid. To pull the lid open,
grasp into the hollow in the lid.
3. Fill the desired amount of clear drinking water into the kettle,
between MIN (0.5
litres) and MAX (1.7 litres)
. Always keep the kettle level, as soon as it is filled.
4. Close the lid by pressing the lid down until it settles in place.
IMPORTANT -
When filling the kettle, ensure not to spill water onto the exterior of
the kettle. If required, wipe dry the exterior of the kettle, before placing the kettle
onto the power base. Do NOT operate the kettle with the lid open. Otherwise,
the temperature control and automatic shut-off will not work properly. Additionally,
there will be high energy loss.
