Gastroback DESIGN SMOOTHIE MAKER MIX & GO, Руководство по эксплуатации

Страница: 26 / 40

EN
26
mixing jar is made of glass.
Do not expose the mixing jar to extreme
temperature changes
to avoid damage. Do not knock the mixing jar
against any hard and/or edged objects. Do not use the mixing jar any
further, when the glass is damaged in any way (e.g. cracks, chipped
edges). Otherwise, the mixing jar could break during operation and/
or splinters could get into your food, causing severe injuries.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is driven electrically. Place the appliance near a suitable
wall power outlet to connect the appliance directly to a protected mains
power supply with protective conductor (earth/ground) connected proper-
ly. Ensure that the voltage rating of your mains power supply corresponds
to the voltage requirements of the appliance (220 - 240 V, 50/60 Hz,
AC, rated for at least 8 A). The installation of a residual current operated
circuit breaker (r.c.c.b.) with a maximum rated residual operating current
of 30 mA in the supplying electrical circuit is strongly recommended. If in
doubt, contact your electrician for further information. In various foreign
countries, the specifications for power supplies are subject to incompa-
tible norms. It is possible that power supplies in foreign countries do not
meet the requirements for safe operation of the appliance. Before opera-
ting the appliance abroad, ensure that safe operation is possible. Do not
use any desk top multi socket outlet, external timer, remote control systems
or extension cord. Always completely unwind the power cord before use.
Do not place the appliance on a power cord. The power cord may not
touch hot surfaces, moving parts, or sharp edges. Power cords may never
be knotted, twisted, pulled, strained or squeezed.
Do not let the plug or
power cord hang over the edge of the table or counter.
Ensure that no
one will pull the appliance by the power cord. Always grasp the plug for
disconnecting the appliance from the power supply.
•
Do not touch the appliance or power plug with wet hands, when
the appliance is connected to the power supply.
Always wipe off
spilled liquids immediately. Do not operate the appliance on wet sur-
faces or on metal surfaces. Do not place or immerse the motor base
in any liquids or let liquids run onto the motor base. Always ensure
that the working surface and motor base as well as the exterior of the