43
TROUBLE SHOOTING GUIDE
Possible Problem
Easy Solution
Machine will not work when
switched ›ON‹
The safety locking arm may not be correctly engaged in the vertical operating posi-
tion with the locking arm located into the two grooves on either side of the juicer
cover).
Motor appears to stall when
juicing
Wet pulp can build up under the cover if the juicing action
is too vigorous. Try slower juicing action by pushing the food pusher down more
slowly. Clean the integrated pulp container, the stainless steel filter basket and the
juicer cover.
Excess pulp building up in
the micro mesh filter basket
Stop the juicing process. Remove the juicer cover, scrape off pulp. Re-assemble and
begin juicing again. Try alternating (soft and hard) vegetable and fruit varieties.
Pulp too wet and reduced
extracted juice
Try a slower juicing action by pushing the food pusher down more slowly. Remove
stainless steel filter basket and thoroughly clean mesh walls with the nylon brush.
Rinse the stainless steel filter basket under hot water. If the fine mesh holes are
blocked, soak the stainless steel filter basket in a solution of hot water with 10%
lemon juice to unblock the holes or wash in the dishwasher. This will remove excess
fibre build up (from fruit or vegetables) which could be inhibiting the juice flow.
Juice leaks between the rim
of the juicer and the cover
of the filter
Try a slower juicing action by pushing the food pusher down more slowly. Fruit and
vegetables with a high water content (tomatoes and watermelon) should be juiced
on low speed.
Bowl surround juice sprays
out from spout
Try a slower juicing action by pushing the food pusher down more slowly.
Juicer makes loud noise
when turned on
Filer basket is not properly snapped into position. Turn the On/OFF button to OFF.
Turn the power OFF. Disassemble the Easy Juicer (refer to ›disassembling‹). Re-
assemble (refer to ›assembling‹).
No juice coming out while
juicing
Check that the spout is not blocked with pulp. Refer to ›Care and cleaning‹.