Gastroback Bartender Pro, Руководство по эксплуатации

Страница: 30 / 48

EN
30
that the voltage rating of your mains power supply corresponds to the
voltage requirements of the appliance (220-240 V, 50 Hz, AC, rated for
at least 8 A). The installation of a residual current operated circuit brea-
ker (r.c.c.b.) with a maximum rated residual operating current of 30 mA
in the supplying electrical circuit is strongly recommended. If in doubt,
contact your electrician for further information. In various foreign coun-
tries, the specifications for power supplies are subject to incompatible
norms. It is possible that power supplies in foreign countries do not meet
the requirements for safe operation of the appliance. Before operating
the appliance abroad, ensure that safe operation is possible. Do not use
any desk top multi socket outlet, external timer, remote control systems or
extension cord. Use a wall power outlet that is always accessible during
operation, so you can unplug the appliance immediately in any case of
malfunction or danger. Before use, always completely unwind the power
cord. Do not place the appliance on a power cord. Do not lay power
cords or multi socket outlets at the rear of the appliance. The power cord
may not touch hot surfaces, moving parts, or sharp edges. Power cords
may never be knotted, twisted, pulled, strained or squeezed. Do not let
the plug or power cord hang over the edge of the table or counter. Ensu-
re that no one will pull the appliance by the power cord. Always grasp
the plug for disconnecting the appliance from the power supply.
Do not
touch the appliance or power plug with wet hands, when the appli-
ance is connected to the power supply.
Always wipe off spilled liquids
immediately. Do not operate or place the appliance on wet, inclined,
or uneven surfaces or on metal surfaces (e.g. sink) or in a tablet or tub.
Do not place or immerse the appliance or power cord in any liquids or
let liquids run onto the appliance or power cord. Always ensure that the
working surface and appliance are completely dry and the drain plug is
closed watertight, before connecting the appliance to the power supply.
Do not place any part of the appliance into an automatic dishwasher.
• When liquids run out during operation, or accumulate under the
appliance, do not touch the appliance, but immediately unplug the
appliance. If in doubt, check the appliance and, especially, the drain
plug for leakage.