85
Important:
The scale platform is an essential precision part of the scale and must
be handled with care. Unscrew the scale platform for cleaning (see: ‘Using the
Scale’). However, do not immerse the scale platform into any liquids.
With liquids
seeped into the scale platform (between metal top plate and plastic base), the
accuracy of the scale could be reduced considerably.
Turn the scale platform counter-clockwise to unscrew the scale platform. If required,
clean the scale platform using a soft, damp cloth and, thereafter, wipe dry.Pull out
the locking pins at both sides of the lid. Thereafter, you can open up the lid manu-
ally. However, always support the lid with one hand, when it is opened up. Do
not let the lid fall down onto the locks in the base to avoid damage. Pull out the
drip tray from the vacuum chamber. Wash the drip tray in warm dishwater. Then
wipe dry thoroughly and leave dry naturally
Important:
Ensure not to spill or drip water or any liquids on or in the appliance.
Special care is necessary when cleaning the interior of the appliance.
Ensure not
to damage the vacuum gaskets.
5. If required, clean the vacuum gaskets by dabbing with a soft cloth.
6. Carefully, remove any residues in the vacuum chamber via a soft damp cloth.
Wipe the heating bar and sealing bar with a soft cloth, moistened with warm
dishwater.
7. Wipe the exterior of the appliance using a soft damp cloth. Then wipe dry via
a soft dry cloth.
8. Carefully move down the lid until it rests on the locks in the base of the appliance.
Let all parts dry naturally for approx. 1/2 hour out of reach of young children.
Replace the drip tray with the somewhat higher bar facing to the hinges of the lid.
Close the lid until it rests on the locks in the base of the appliance. Re-place the
locking pins at both sides of the lid. The locking pins can only be inserted in the
correct orientation and will engage with a click, when positioned correctly.
9. Without violence, ensure that the lid is connected to the locks in the base of the
appliance and cannot be moved manually.
10. For storage, follow the instructions given in the next section ‘Storage’.
