Gastroback 42395, Руководство по эксплуатации

Страница: 23 / 31

EN EN
44 45
PROPERTIES OF YOUR NEW TOASTER
Your new toaster is intended for heating almost all types of bread to the desired
browning: from soft to crispy.
•
Only »DESIGN TOASTER DIGITAL 4S« (4 bread slits):
this appliance has all
displayed items and operating elements double. The left handed operating ele-
ments are used for controlling the left pair of bread slits; the right handed ele-
ments for the right pair of bread slits. You may enter your preferred settings and
use the two halves of the appliance completely independently from each other.
• The appliances offer 7
programs
that hold preset heating times for various tasks.
7 possible settings for the desired browning make it easy to get your preferred
results. A menu of the available programs and the currently selected browning
are shown on the LCD display. During operation, the remaining heating time is
given as a count down.
• The mechanic of the appliances keeps even thin slices of bread at the centre of
the bread slits for avoiding that the bread comes too close to the heating ele-
ments. This ensures that both sides are toasted evenly.
• You may
roast frozen bread
immediately after taking it out of the freezer via
the function “DEFROST” (see: ‘Toasting Frozen Bakery Produce’). The function
“REHEAT” is suited for simply
warming up cold bread
—even when it has been
roasted before (see: ‘Short Heating’).
•
Memory function:
You may save your preferred settings in 4 storage places for
getting the desired results with every run. Once saved within the memory of the
appliance, your settings will persist even when the appliance is disconnected
from the power supply (see: ‘Memory Function’).
• All settings (bread type, browning, “DEFROST” and “REHEAT”) may be changed
freely during operation., The appliance runs on with your new settings immedia-
tely. As soon as the set heating time elapsed, the
automatic shut-off
terminates
the heating process. The start lever springs back to the idle position automati-
cally. You may
manually terminate the heating process
any time you like. For
this, simply press the “CANCEL” button.
• For taking out even small bread slices easily, with the start lever in the idle posi-
tion, you can manually move it upwards a little further. The additional
bun tray
is designed for warming buns, croissants and plain cakes. Bread crumbs fall
into the
Crumb tray
in the bottom of the appliance. For emptying and cleaning,
simply pull it out of the rear of the appliance. The
energy saving mode
switches
off the display, when the appliance is in standby mode for approx. 5 minutes
with no button pressed. Simply press a button for switching the appliance back
to standby mode.
IMPORTANT -
After each heating process, leave the appliance cool down for at
least 1 minute, before starting the next heating cycle. This will avoid overheating
and ensure a long lifetime of the heating elements.
NOTE
A lot of useful tips are given in chapter ‘Tips for Best Results’.
OPERATING ELEMENTS
Operating
Element
Function How to Use It
Start lever
Starting the heating
process
Press down this lever until it engages in the lower opera-
ting position. This way the bread slices are lowered into
the bread slits and the heating process starts.
REHEAT Warming up bread
With this function selected, the appropriate button illumi-
nates blue and the heating time is set to 30 seconds (see:
‘Short Heating’). Press the button again for de-activating
the function.
DEFROST
Thawing and toasting
frozen bread
Select this function for toasting frozen bread slices imme-
diately after taking them out of the freezer. With this
function selected, the appropriate button illuminates blue
and the heating time is extended by 25-30 seconds (see
below: ‘Toasting Frozen Bakery Produce’). Press the but-
ton again for de-activating this function.
CANCEL
Terminating operation
This button is illuminated red, while the toaster is heating.
Use this button for terminating the currently running hea-
ting process.
+ and –
(browning but-
tons)
Selecting the browning
Press one of these buttons for increasing („+“) or decre-
asing („–“) the heating time, and therefore, setting the
desired browning according to your liking.
MEMORY
(storage place)
Save and recall stored
settings
For saving and recalling your favourite settings (see below:
‘MEMORY Function’ and ‘Operation / Using the MEMORY
Function’).
BREAD TYPE Selecting the program
Press this button repeatedly, for moving the arrow in the
program menu to the desired program entry (see below: ‘7
Preset Programs’).