Tips for best cutting results
• Always place food to be sliced on a wooden or plastic cutting board. Do not slice
food on china, metal or bench tops, as scratching may occurs.
• Use the multifunctional blade for cutting meat and bread and the wavy blade
for cutting vegetable, fruit, cakes and alike.
• Guide blades through food. A sawing action is not necessary. So not force blades
through food.
• To maintain the sharpness of blades, do not cut through bones, fruit pips or stones or
any other hard substances.
• For best results when carving meat and poultry allow cooked meat to stand for
10-15 minutes before slicing. This allows the juices to set and makes carving easier and
neater.
• Before carving meat or chicken, remove skewers. If desired, string may be left around
the meat whilst carving. The use of carving fork to steady the meat assists in carving
straight, even slices.
• Do not attempt to sharpen blades.
Care and Cleaning
WARNING:
To avoid injury to persons and damage, always release the on button, wait
for the motor to stop completely and unplug the appliance, immediately after operation
and before assembling/dismantling or cleaning the appliance.
The blades of the knife are very sharp! Do not touch the blades. To handle the blades,
always hold on to the safety guide.
CAUTION: DO NOT place the handle or power cord in an automatic dishwasher. Do not
immerse the motor or power cord in any liquids or spill any liquids on it or place the
motor on wet surfaces.
Always wipe off spilled liquids immediately.
Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disinfectants, bleach)
or any sharp or hard objects (i.e. metal scouring pads) for cleaning, for this could damage
the surfaces. Always handle the entire appliance with care and without violence.
1. Release the on button, wait for the motor to stop completely, and unplug the appliance
from the power outlet before removing the blades and/or cleaning.
2. Press the blade release buttons with first finger and thumb of one hand. With the other
hand hold the blades by the safety guards with the cutting edge facing downward and
pull the blades out of the slots. Unlock the blades by sliding apart. Always hold the
21
41600_manual_ElektroMesser.qxp 04.01.2007 08:54 Seite 21