• Do not leave the appliance unattended while connected to the power supply.
Always
release the on button and IMMEDIATELY unplug the appliance after operation and if it is
not in use (even for a short break) and before cleaning and/or assembling or dismantling.
Always grasp the plug to disconnect the appliance from the power outlet.
• Always handle the power cord with care. Do not pull or strain the power cord. The
power cord may never be knotted or squeezed. Do not let the power cord hang over
the edge of the table or counter. Take care not to entangle in the power cord. Do not
touch the appliance with wet hands to avoid risk of electric shock. Do not touch the
appliance, if it is damp or wet or is touching wet surfaces while connected to the mains
power supply. In this case, immediately unplug the appliance and dry the appliance (see
‘Care and Cleaning’).
Moving Parts – Risks of Injury to Persons
• Always release the on button, unplug the appliance and wait for the motor to stop,
before assembling/dismantling or cleaning the appliance. Always place the appliance on
a stable, level and dry surface, where it can not fall.
•
The blades of the knife insert are extremely sharp. Do not touch the blades.
Do not use the tools of the appliance, especially the blades, for any other purpose, than
described in these instructions, to avoid severe injury and damage.
Always handle the
tools of the appliance with care and without violence.
17
41600_manual_ElektroMesser.qxp 04.01.2007 08:54 Seite 17