Gastroback 41403, Руководство по эксплуатации

Страница: 48 / 60

48
worm housing is fitted all the way into the
opening of the drive shaft the release button
sinks into the motor housing. Turn the worm
housing counter clockwise until the shaft is
facing upright and is locked into place.
Note:
When the worm housing is securely attached
you can hear a click sound and the release
button comes out of the recess again.
3. Press the feed pan onto the worm housing
(picture G).
4. Place the pusher into the opening of the
feed chute (picture H).
The appliance is ready for operation.
ASSEMBLING FOR MAKING KEBBE
1. Take the worm housing into the right hand
and insert with your left hand the worm
inside the worm housing (picture I). The side
of the worm with the plastic end has to face
the worm housing when putting it inside the
worm housing. The worm is correctly assem-
bled when the plastic end of the worm
stands a few millimetres out of the worm
housing. Take the plastic finger. The flat
end with the recess has to face the worm
housing when attaching. If necessary turn
the plastic finger a little bit until the arresting
pin of the worm housing locks precisely into
the corresponding recesses of the plastic fin-
ger.
IMPORTANT: If the tools overlap the edges
of the worm housing the worm is not placed all
the way inside of the worm housing. Turn the
worm a little bit to make it fit inside but do not
use force. If mounted correctly the plastic finger
is aligned with the front of the worm housing
F
G
H
I