background image

 

18

Sperian Instrumentation Warranty Gas Detection Products 

General 

Sperian Protection Instrumentation, LLC (hereafter Sperian) warrants gas detectors, sensors and 
accessories manufactured and sold by Sperian, to be free from defects in materials and workmanship for 
the periods listed in the tables below.  
Damages to any Sperian products that result from abuse, alteration, power fluctuations including surges 
and lightning strikes, incorrect voltage settings, incorrect batteries, or repair procedures not made in 
accordance with the Instrument’s Reference Manual are not covered by the Sperian warranty. 
The obligation of Sperian under this warranty is limited to the repair or replacement of components 
deemed by the Sperian Instrument Service Department to have been defective under the scope of this 
standard warranty.  To receive consideration for warranty repair or replacement procedures, products 
must be returned with transportation and shipping charges prepaid to Sperian at its manufacturing 
location in Middletown, Connecticut, or to a Sperian Authorized Warranty Service Center.  It is necessary 
to obtain a return authorization number from Sperian prior to shipment. 
THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER WARRANTIES AND 
REPRESENTATIONS, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE 
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SPERIAN WILL NOT BE LIABLE FOR 
LOSS OR DAMAGE OF ANY KIND CONNECTED TO THE USE OF ITS PRODUCTS OR FAILURE OF 
ITS PRODUCTS TO FUNCTION OR OPERATE PROPERLY. 

Instrument & Accessory Warranty Periods 

Product(s) Warranty 

Period 

Biosystems PHD6, PhD

5

, PhD Lite, PhD Plus, PhD 

Ultra, Cannonball

3,

 MultiVision, Toxi, Toxi/Oxy Plus, 

Toxi/Oxy Ultra, ToxiVision, Ex Chek 

As long as the instrument is in service 

ToxiPro

®

, MultiPro 

2 years from date of purchase 

ToxiLtd

®

 

2 years after activation or 2 years after the 
“Must Be Activated By” date, whichever 
comes first 

Toxi3Ltd

®

 

3 years after activation or 3 years after the 
“Must Be Activated By” date, whichever 
comes first 

Mighty-Tox 2 
Prorated credit is given towards repair or purchase of a 
new unit of the same type.  

  0 –  6  months of use  100%  credit 
  6 – 12  months of use   75%  credit 
 12 – 18  months of use   50%  credit 
 18 – 24  months of use   25%  credit 

IQ Systems, Series 3000, Airpanel, Travelpanel, 
ZoneGuard, Gas

9

Chek1 and Gas

9

Chek4 

One year from the date of purchase 

Battery packs and chargers, sampling pumps and 
other components, which by their design are 
consumed or depleted during normal operation, or 
which may require periodic replacement 

One year from the date of purchase 

Sensor Warranty Periods 

Instrument(s) 

Sensor Type(s) 

Warranty Period 

O

2

, LEL**, CO, CO+, H

2

S & 

Duo-Tox 

2 Years 

Biosystems PHD6, PhD Plus, PhD Ultra, PhD

5

PhD Lite, Cannonball

3

, MultiVision,

 

MultiPro, 

ToxiVision,

 

ToxiPro

®

, Ex Chek 

All Other Sensors 

1 Year 

CO, CO+, H

2

S 2 

Years 

Toxi, Toxi/Oxy Plus, Toxi/Oxy Ultra 

All Other Sensors 

1 Year 

All Others 

All Sensors 

1 Year 

**  Damage to combustible gas sensors by acute or chronic exposure to known sensor poisons such 
as volatile lead (aviation gasoline additive), hydride gases such as phosphine, and volatile silicone 
gases emitted from silicone caulks/sealants, silicone rubber molded products, laboratory glassware 
greases, spray lubricants, heat transfer fluids, waxes & polishing compounds (neat or spray aerosols), 
mold release agents for plastics injection molding operations, waterproofing formulations, vinyl & 
leather preservatives, and hand lotions which may contain ingredients listed as cyclomethicone, 
dimethicone and polymethicone (at the discretion of Sperian’s Instrument Service department) void 
Sperian Instrumentation’s Standard Warranty as it applies to the replacement of combustible gas 
sensors. 

Содержание ToxiPro





















Отзывы: