gassero ALUBOX X-treme 350 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 48

gassero ALUBOX X-treme 350 Скачать руководство пользователя страница 3

1.

MEANINGS OF THE SYMBOLS AND SAFETY

1.1

MEANINGS OF THE SYMBOLS

The symbols which are used in this document and their
meanings are as follows:

WARNING:

Danger of material damage or damage to

the environment.

ELECTRICAL HAZARD:

Danger of death or serious

injury due to electric shock.

DANGER :

Actions that are certainly not to be done.

Material damage and severe personal damage may
occur.

Refers to the

Information / Recommendations

to be

considered by the user

1.2

GENERAL WARNINGS

Your  boiler  must  be  used  in  accordance  with  the
instructions  and  purposes  specified  in  the  user
manual. The manufacturer cannot be held liable for
damage to the people, animals and property due to
improper  installation,  subsequent  repairs  and
modifications.

Boiler may not be used by persons with inadequate
physical, mental and perceptual capacity and
without experience and knowledge.

1.3

SAFETY INSTRUCTIONS

IF GAS SMELLS:



Do not open or close the power switches, do not
touch the plugs or sockets.



Do not smoke



Do not use your phone



Close the gas valve immediately



Ventilate the space by opening the doors and
windows.



Notify everyone in the building.



Call  the  emergency  service  of  the  gas  distribution
company  you  are  connected  to.  Do  not  allow
anyone  to  enter  the  boiler  room  until  the
emergency service arrives.



If  there  is  a  sealing  due  to  gas  leakage,  do  not
disassemble  the  seal,  contact  the  gas  distribution
company  to  disassemble  the  seal  after  necessary
repair.



The  smell  of  the  waste  gas  formed  after  burning
with  natural  gas  may  resemble  each  other.  Never
use  the  boiler  in  the  event  of  a  leak  in  the  waste
gas system.

2

«
1
2
3
4
5
...
»

Содержание ALUBOX X-treme 350

















































Отзывы:

Нет отзывов