Gason 7312, Руководство оператора

Страница: 6 / 110

SAFETY
Page 2
07/18
The fertiliser spreader has been designed
with safety in mind. However, the equipment is
only as safe as the person operating it.
Do not operate the spreader until you
have read and understood this manual. If you
feel you need help or advice on the operation of
the Seeder, contact your local authorized
Gason Dealer.
To ensure trouble free and safe operation
of your spreader, it is important to carry out a
daily safety check to reduce the possibility of a
costly breakdown.
Items to Check Daily During
Operation
1. Check all wheel nuts are tight during the first
couple of days of use or after transportation
(refer page 6).
2. Check tyre pressures and tyre conditions in
general.
3. Ensure the safety warning decals around the
spinners are in place and are legible.
4. Check all hydraulic breakaway connections
are firmly engaged.
5. Check all hydraulic hoses and fittings for
leaks.
6. Check main spreader feed chain and drive
sprockets for wear or damage.
7. Check feed chain turns freely before
operating each day or after transporting
when loaded.
8. Check drawbar pin for wear.
9. Check main drive shear pins between the
gearbox and drive shaft are operational.
10. Check spinners for damage and wear before
operating and that they are clear of product if
starting near livestock or people.
General Safety Conditions
DO NOT ride on the machine when
operating.
DO NOT touch or attempt to adjust any
moving parts.
DO NOT adjust hydraulic fittings while under
pressure.
DO NOT remove any safety guards while the
spreader is operating.
DO
carry out the daily safety checks and operate
the spreader in a safety conscious manner.
Hydraulics
Before working on the hydraulic system
always check that the spinners are not
operating, and that there is no pressure in the
hydraulic system.
Never attempt to disconnect a breakaway
coupling if the spinners are operating. Turn the
tractor off if working on the spinners or gearbox
lift cylinder of the spreader.
Leaving the Spreader Unattended
Ensure that the drop leg on the jack is
correctly pinned into position and that the foot is
on firm ground.
Chock the spreaders wheels to prevent it
from rolling if on a slope.
When Working on the Spreader
Place suitable stands under the trailer if
removing a wheel or carrying out major work.
Wear safety glasses if observing the
spreader while the spinners are operating.