12
13
Step 5c:
The connection is gas tight when no bubbles grow around
the gas connection.
Step 6
Place all lava rocks evenly in the fire table on the top
of the appliance. Never cover the ignition screen when
placing the lava rocks into the fire table. Always keep
ignition screen visible.
WARNING:
This screen must be clear and free of
obstructions at all times to ensure proper
operation.
DO NOT
place
Lava Rocks on
the screen. Keep
screen clear.
Screen
Correct
Incorrect
GAS CONNECTION INSTRUCTIONS
STEP 11
Ensure cylinder valve is in its full off position. Check
for any damage to either the cylinder connection or
the hose. NEVER attempt to use damaged equipment.
Attach the regulator and hose to your gas cylinder.
Tighten the nut to a positive stop by hand.
STEP 12
Turn on the gas cylinder ensuring that the control knob
on the outdoor heater is turned OFF at this point.
DO NOT ATTEMPT TO LIGHT THE HEATER!!.
STEP 13
Use a solution of soapy water (dishwashing liquid and
w
ater is fine). Brush it on or use a
spray bottle as
shown in the drawing. Ensure the connections have a
good coating.
STEP 14a
If the connection is leaking, bubbles will start to grow
in the soapy solution. If this happens shut off the gas
supply at the cylinder.
STEP 14b
Tighten the connections using a crescent then repeat
steps 12-13.
STEP 14c
The connection is gas tight when no bubbles grow
around the gas connection.
ASSEMBLY INSTRUCTIONS