Gasmate GM135-019, Руководство пользователя

Страница: 7 / 8

7 6
• Heater must not be located immediately
below a socket outlet.
• Heater must not be located in front of a
socket outlet.
IMPORTANT
POSITIONING THE HEATER
The heater should only be operated at a minimum
distance of 1 metre from any wall or other object.
Position the heater in order to optimise the air
flow of the area.
TO OPERATE
1. Plug into 240V AC power point.
2. To turn on - switch the power point on.
3. Switch the heater on by turning knob to “I” on
control panel. One element will operate at half
power. Turn knob to “II” to operate heater at
full power.
4. To turn off - switch heater to “O” at control
panel and turn off power point.
5. Unplug lead from power point when not in use.
IMPORTANT: Turn off the heater. Switch off the
power switch and disconnect the heater from the
power socket. Wait for the heater to be completely
cool before cleaning (at least one hour).
• Vacuum clean air vents and grilles to remove
dust from these areas.
• To remove dust on external surfaces, wipe the
heater with a damp (not wet) lint- free cloth
rinsed in hot soapy water only.
• DO NOT use solvents, e.g. Petrol, Toluene,
Methylated Spirits etc to clean the heater, as
these will damage the surface finish and may
cause a fire when unit is next used.
• DO NOT spray with liquids or submerge in
liquids or water.
• DO NOT allow water or mild dish washing
solution to enter or drip onto the heater.
• DO NOT attempt to clean the interior of the
heater.
• DO NOT attempt to open the heater casing at
any time.
STORAGE
• Store the heater carefully in a dust-free area
during the off season. It is ideal to store the
heater in the carton it was supplied in. Neatly
wind the cord of the heater to prevent damage
to the cord.
Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber, Hamilton, N.Z. www.gasmate.co.nz
CLEANING AND CARE OPERATING INSTRUCTIONS