Gasmate GM135-019, Руководство пользователя

Страница: 6 / 8

7 6
INSTALLATION
Step 1 -2
• As shown in figure A, turn over the Base and
Base Cover, let Screw fix the Wheels through
the small holes on the Base.
ASSEMBLY INSTRUCTIONS
Fig. C
Fig. A Fig. B
• Fix Screw Feet M6*30 onto the Screw Board,
and adjust it into the same level as the Wheels.
• Let the Screw M8*120 get through the Base,
Base Cover, S/S Tube. Use the provided Allen
Key M8 to fasten the Screw M8*120 with Foot
Bracket.
Step 3
• Turn over the Heater Body. Put the Base on it.
Pull out the Power Cord through the Base Cover
and Base.
• Let the Base Brackets match with the holes
on the Base Cove and Base. Then fix the Base
Brackets with the Washers and Screws with the
provided Allen Key M6.
• Fix the Power Cord with the Cord Clip.
• Put Table Top on top of the Heater Body.
Make sure the screw holes on Table Fixture
are matching the holes on Top Steel Board.
Fix Table Top onto Heater Body with 4 Screws
(M6*8) and Spring Washers ø6.2.