background image

5

4

• 

CAUTION: To reduce risk of electric 
shock, DO NOT IMMERSE the Product in 
any liquid, or use the Product near baths, 
basins, swimming pool, shower area or 
other vessels containing water or other 
liquids, or when standing in or on damp or 
wet surfaces. If any Electrical product falls 
into water, UNPLUG it immediately; DO NOT 
REACH INTO THE WATER. Do not immerse 
or expose the Flexible Cord or Plug to rain, 
moisture or any liquid. 

• 

IMPORTANT: Prior to reconnecting the  
Power Supply, the complete Product should  
be inspected by a qualified technician.

• 

WARNING: To avoid overheating the Power 
Supply Cord, completely unwind all the 
cord, including from the cord storage area 
of the heater, if fitted.

• 

CAUTION: This Product should not be 
used/operated in a confined space.  Always 
use/operate this Product well away from 
walls and curtains.  A fire may occur when 
this Product is in operation, if it is covered, 
or is close to flammable materials, such as  
curtains, drapes or wall coverings, etc.

• 

CAUTION: To reduce the risk of shock 
or damage to the Product, DO NOT 
disassemble. No user serviceable parts 
inside.

• 

CAUTION: DO NOT immerse the Product,  
its Flexible Cord or Plug in water or any  
other liquid.

• 

IMPORTANT: In some Products the    
replacement by the user of the Flexible Cord  
is not intended. Special Tools are required 
to disassemble the Product or to replace the 
Cord, or a special Cord is required.

FOR YOUR SAFETY

1.  After each use, make sure the Product is 

turned OFF and DISCONNECTED from the 

Power Supply. Let the Product cool after use 

before moving, cleaning or storage.

2.  Clean the exterior of the Product by wiping 

with a slightly dampened (not wet) soft 

cloth. Avoid the use of scouring pads, harsh 

detergents, solvents, polish, abrasive or 

aerosol cleaners as they may damage the 

surfaces of the Product. Dry with a clean, soft 

cloth before storage, or reconnecting to the 

Power Supply. 

3.  When storing the Product, loosely coil the 

Power Cord. Avoid wrapping the Power Cord 

around the Product. Store in a cool, dry place. 

NEVER move, carry or hang the Product by the 

Power Cord.

Care & Cleaning

Содержание EH240









Отзывы: