5
4
OPERATING INSTRUCTIONS
Note: This heater requires a 1.5m clearance on
all sides.
1. Always operate a Free Standing Heater on
a dry, stable and level floor surface, well away
from curtains, drapes and soft furnishings. DO
NOT operate this Product immediately below
an electrical Socket Outlet.
2. Plug the Power Cord into a Power Outlet and
turn Power Outlet ON
3. To turn heater ON, rotate knob
O
is off
I
is 800W (1 element)
II
is 1600W (2 elements)
4. To turn heater OFF, rotate knob to O
Note: Knob can be rotated clockwise or anti
clockwise for easy use.
5. When unattended, we recommend you
make sure the Product is turned OFF and
DISCONNECTED from the Power Supply.
6. Be sure the Product is turned OFF,
DISCONNECTED from the Power Supply and
allowed to cool before moving.
7. When storing the Product, loosely coil the
cord. It is important to allow the Product to
cool before storage.
TO TURN HEATER ON/OFF
• Always operate the Product from a power
source of the same Voltage, Frequency
and Rating as indicated on the Product
Identification Plate.
• Avoid any possibility of a fire hazard by
never covering, positioning or arranging of
any material near, or restrict the airflow of
the Heater. This Heater is not intended to be
used as clothes or towel dryer.
• If used outdoors ensure heater power cord
is connected to an outdoor power point.
• The power supply must be supplied
through a residual device (RCD) having a
tripping current not exceeding 30mA.
IMPORTANT
