5
OPERATING INSTRUCTIONS
CONTROL PANEL
Heat level
control mode
Temperature
control mode
Heater operating
Input power
connected
Stand by
Fuel pump
Glow plug
Temperature
sensor
Fan operating
Timer
Error
High altitude
mode
ICON DESCRIPTIONS
BUTTON FUNCTIONS
Power
Turns the unit ON and OFF
Increase
value
Increases the selected value
(can be the heating level, set
temperature, or timer set point)
Decrease
value
Decreases the selected value
(can be the heating level, set
temperature, or timer set point)
Settings
Changes the operating mode
from heating level to temperature
set-point control
Fuel
pump
priming
Hold down to activate the fuel
pump to prime the fuel system
before first use or after fuel tank
has run dry when refilled
Select
Confirm a selected setting
STANDBY
When the heater is OFF and connected to DC power,
the controller will show the input voltage detected
in the main part of the display. It also shows the current
ambient temperature detected by the controller.
- Controller in standby showing input voltage is 12V