gascraft KS18784, Руководство пользователя

Страница: 10 / 12

Installation
Selecting a Location
This gas smoker is
for outdoor use only
and
should be placed in a well-ventilated area, and on a
safe and even surface. Never place your gas smoker
below ground level. Take care to ensure that
the gas
smoker must be used on incombustible floor
.
The
sides of the gas smoker should NEVER be closer
than 1 metre from any combustible surface, including
trees and fences and make sure that there are no
heat sources near the gas smoker (cigarettes, open
flames, spark etc.). Keep this gas smoker away from
any flammable materials!
Precautions
Do not obstruct any ventilation openings in the gas
smoker body. Position the gas bottle on level ground
next to the gas smoker and safely away from any
source of heat. Should you need to install or change
the gas bottle, confirm that the gas smoker is switched
off, and that there are no sources of ignition
(cigarettes, open flame, sparks, etc.) near before
proceeding.
Fixing a Regulator to the Gas Bottle
Confirm all gas smoker control knobs are in the off
position. Connect the regulator to the gas bottle
according to your regulator and bottle dealer’s
instructions.
Leak Testing (Always perform a leak test in a
well-ventilated area)
Confirm all control knobs are in the off position. Turn
the gas on / open the gas control valve on the gas
bottle or regulator. Check for leaks by brushing a
solution of ½ water and ½ liquid detergent / soap over
all the gas system joints, including gas bottle valve
connections, hose connections, and regulator
connections. NEVER USE AN OPEN FLAME to test
for leaks at any time. If bubbles form over any of the
joints there is a leak. Turn off the gas supply at the gas
bottle. Retighten all joints. Repeat test. If bubbles form
again do not use the gas smoker and contact your
local distributor for assistance. Always wipe the mixed
solution (½ water and ½ liquid detergent / soap) from
all joints and connections after leak testing.
Operation
Warning

Before proceeding, make certain that you
understand the
IMPORTANT INFORMATION
section of this manual.
Preparation Before Cooking
To prevent foods from sticking to the cooking
surface, please use a long handled brush to apply a
light coat of cooking or vegetable oil before each
barbecuing session. (Note: When cooking for the
first time, paint colours may change slightly as a
result. This is normal and should be expected.)
During use, the protective coating may come off the
cooking surface. This is normal and is not harmful.
Line the drip pan with aluminium foil, making sure
that drain hole is not blocked. This will make cleanup
easier.
Lighting Instructions

Read and follow all instructions and warnings in
manual before lighting.

Keep both doors open while lighting.

Push and turn the control knob to HIGH while
pressing down firmly and rapidly on the ignitor
You should hear a click from the ignitor. Let the
ignitor
button return to its starting position and
press it again. Repeat the action until the burner
ignites.

If ignition does not take place within 5 seconds,
immediately turn the control knob to OFF. Wait
5 minutes and repeat step 3 or refer to match
lighting instructions in the manual.
Manual Ignition Instruction for Main Burner

Insert lit match through the match-lighting hole at
the side or bottom of the gas smoker body.

Push in and turn the burner control knob anti-
clockwise to the max position, the burner should
ignite.

After the left or right portion of the burner is lit,
light the remaining portion of the burner.

If burner fails to ignite, contact your local dealer
for assistance.

After ignition, the burner should be burned at the
max position for 3-5 minutes in order to preheat
the gas smoker. This process should be done
before every cooking session. The hood (where
applicable) should be open during preheating.

After completion of preheating, the burner should
normally be turned down to a lower position for
best cooking results.
10