Wiring
Wiring Diagrams
Page 18 MDE-4567D 9820K Series AST Pumps Installation and Operation Manual · January 2020
Dual Pulse Output
The following diagram illustrates the proper output for using a Pump I/F option configured to
provide two isolated pulse outputs from a 9820K. This option is available on all 9800K Series
pumps/dispensers. Use this wiring diagram instead of the pulser wiring diagram shown in
on
Figure 3-5: Dual Pulse Output
Note: All wiring and conduit runs must conform with all building/fire codes, all Federal,
State, and Local codes, NEC
®
, NFPA 70, NFPA 30, and Automotive and Marine Service
Station Code (NFPA 30A) codes and regulations. Canadian users must also comply with
the Canadian Electrical Code.