Gasbike Ghost Racer, Инструкция пользователя и руководство владельца

Страница: 13 / 31

Wide Cranks
Because of the width of the the motor the use of wide cranks is needed.
The cranks are a standard square taper bottom bracket. If the cranks that
came on the bike are one piece, a square taper bottom bracket will need to
be used (not included).
Install the Pedals
Pedals installed on the wide cranks provided in the kit use a 9/16” Pedal
size. The pedals will have a R or a L stamped on them, they indicate which
foot will touch it when seated on the bike. Screw the Right pedal on the the
side where your right foot would be, use a 15mm Wrench to tighten. Pedals
will always screw in a forward direction. Do the same with the left on the
left side.
12