GAS MAD B1, Руководство пользователя

Страница: 11 / 16

10
TROUBLESHOOTING
NO POWER/SOUND
Check the enclosure/subwoofer to make sure it isn’t damaged. If your pre-loaded enclosure
doesn’t get any power, the most common issue is either in the wiring or in the amplifier. Use
a multimeter to measure the amplifier’s voltage on the +12V terminal and the remote signal
terminal. Make sure that you have a negative ground connection. Check the built-in fuse (if
there is one) on the amplifier. If there’s no power coming through – control the fuse on the
power cable. If the fuse is intact you should check all of the wiring to ensure cable integrity.
DISTORTION
Start by looking over the enclosure/subwoofer so there’s no damage or connection issue
with the wiring. Check the speaker cables to make sure that the polarity isn’t reversed on
one channel. Check the settings on the amplifier, make sure that the gain/level function is
set according to the amplifier’s instructions. If your amplifier has a boost function, lower its
effect or turn it off.
When all of the above has been tested/looked over, and all is as it should be but the pre-
loaded enclosure still has no power/sound or other problems, consult your local GAS AUDIO
POWER dealer/installer