GAS MAD B1, Руководство пользователя

Страница: 9 / 16

8
HOW TO
INSTALL PRE-LOADED ENCLOSURE
The MAD B1-110/B1-210/B1-310 enclosures uses one 4 Ohm voice coil. Since the enclosure is
pre-loaded with MAD S1 subwoofers, the installation is very simple. Just connect it with
your amplifier and get ready for an awesome bass experience!
Before installing your brand new pre-loaded enclosure, make sure that you have everything
you need. Have the right tools ready, and make sure that you have the necessary knowled-
ge/skill to perform the installation properly. Preparation and knowledge is crucial!
MAD B1-110 connection
4 Ohm
The MAD B1-210 has 2 Ohm impedance (standard configuration), can be changed to 4 or 8
Ohm. It is important to know the limits of your amplifier to optimize its performance. You
can vary the impedance by altering the wiring configurations. Choose the wiring diagram
below that corresponds to the impedance stability of your amplifier.
MAD B1-210 parallel
connection (normal)
2 Ohm
MAD B1-210 singular
connection
4 Ohm
MAD B1-210 serial
connection
8 Ohm
- + - + - +
MAD B1-310 connection
1.33 Ohm