38
5
With
Calibration
>
Cleaning
it
is possible to also enable
Cleaning cycles and
Cleaning
Start time
can be defined
With
Cleaning
–
Every/
Cleaning
Duration
and
Cooldown Duration
select the
required Timing
Example: 13 days after starting the Interval Mode on March 11, 2021 the first cleaning
cycle is started at 18:00 for 10 hours, followed by a cool-down of 2 hours.
Consecutive measurements will be re-initiated at 6 am in the morning of day 14 at
the defined measurement cycle frequency
.
6
After all entries are defined
the defined Interval can be
started
Close the dialog with
Start
.
The Interval Mode is started. In
the
shown
settings
the
Cleaning will not be included in
the interval schedule.
