GAS GAS EX 250 2023, Руководство пользователя

Страница: 114 / 144

17 SERVICE WORK ON THE ENGINE
112
E02040-10
–
Mount throttle valve body
3
.
–
Remove the locking piece and position the subframe.
Info
Pay attention to intake flange
4
.
–
Position and tighten clamps
3
of the throttle valve body.
Guideline
Screw, intake
flange/reed valve
housing
M6 6 Nm (4.4 lbf ft)
E02039-10
–
Mount and tighten screws
1
.
Guideline
Screw, subframe
bottom
M8x18 30 Nm (22.1 lbf ft)
Loctite ® 2701™
–
Remove screws
2
.
–
Mount and tighten screws
2
.
Guideline
Screw, subframe
top
M8x20 35 Nm (25.8 lbf ft)
Loctite ® 2701™
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 43)
–
Install the air filter box cover. ( p. 56)
–
Install the fuel tank. ( p. 62)
–
Add 2-stroke oil. ( p. 29)
–
Prime the oil pump. ( p. 108)
–
Mount the seat. ( p. 55)
–
Install the main silencer. ( p. 59)
17.5 Checking the gear oil level
Info
The gear oil level must be checked when the engine is cold.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.