WARNING
Genuine GAS GAS spare parts should always be used.
If the filter is fitted incorrectly, the engine oil will not flow, resulting
in poor running of the engine.
ATTENTION
- Avoid all contact with the oil as it is harmful to your health and may
provoke irritations.
- Keep new or used oil out of the reach of children and animals.
- Wash yourself with neutral soap and water if oil has been in contact
with your skin.
- Used oil must always be stored in an approved container for future
recycling, according to the legislation in effect.
NOTE
- Change the oil when the engine is hot to facilitate its drainage
through the drain on the lowest part of the engine.
- Always use original GAS GAS parts.
To change the oil, follow the following steps:
1. Place a recipient underneath the crankcase.
NOTE
Put used motor oil in an appropriate container for recycling.
2. Drain the engine oil from the
crankcase by removing the plug
(B), taking care to always keep
the motorcycle horizontal.
-
43
-
3. Remove the three
bolts (C) from the
filter cover.
4. Take off the filter
cover, remove the
filter element (D)
and the gasket (E).
Always replace
both components
together.
(B)
(D)
(E)
(F)
(C)
