Gas Clip Technologies GCT IR Link, Краткое руководство пользователя

Страница: 9 / 10

GCT IR Link Software Quick Reference Guide
QRG-GCT-IRL-SW v3 Portable gas detectors you can count on 6 of 7
This section will cover the settings and options that are unique to specific model types .
Life Remaining [1]: Displays the total life remaining of the detector in months and days.
Display [2]:
Lets the user select how the detector display is configured. The display can be set to show Sensor Reading at
all times, Life Remaining at all times, or Sensor/Life Remaining. The default, Sensor/Life Remaining, setting will show Life
Remaining until there is a reading of the target gas and it will then switch over to the Sensor Reading display, once the reading
reaches “0” again it will switch back to Life Remaining.
Hide Bump Due LED flashing [3]:
Lets the user select whether to enable, or disable, the Flashing LED notification that a Bump
is due (Similar to the Maintenance Notification for Multigas detectors).
Self-Test Interval [4]: Sets the interval for the detector to request a self-test.
MGC PUMP
Pump Test:
Requires the pump inlet to be blocked and unblocked on detector start up as well as after a Pump Block alarm has
been acknowledged.
MGC SIMPLE
Life Remaining:
Displays the total life remaining of the detector in months and days.
Life Display:
While the detector is not in alarm, the display screen will show the Life Remaining instead of the Sensor Readings.
* For the most up to date list of Options and Settings please refer to your product’s User’s Manual . *
1
2
3
4
SGC & SGC PLUS