6.02.08 Connecting the safety switch
6.01
Commissioning
6.02
●
Check the machine, particularly the electrical wriring for any damage.
●
Clean the machine thoroughtly and then oil it or fill oil in (see
Chapter 11 Care and
maintenance
).
●
Have a mechanic check whether the motor of the machine can be operated with the
available power supply, and that the motor is correctly connected in the junction box. If
there are any discrepancies. the machine
must not be operated under any
circumstances
.
The machine only be connected to an earthed socket!
●
When the machine is running, the balance wheel must turn towards the operator.If it does
not, the motor connection must be changed by a mechanic.
●
Machines with pneumatic equipment must be connected to the compressed air supply.
The pressure gauge should indicate a pressure of 6 bar. If necessary, adjust to the
correct setting (see
Chapter 11.07 Checking adjusting the air pressure
).
●
Connect plug 1 of safety switch 2 as
shown in
Fig.
When the sewing head is
tilted back,the safety switch
prevents the machine starting
when the main switch is on.
www.garudan.cz
