Garudan GOV-1004-24, Руководство пользователя

Страница: 13 / 79

© ANITA
MP04000EN_190301 13
2. Changing upper knife and lower knife
Changing upper knife:
Loosen screw (1), push lower knife holder (2) to
left and then tighten screw (1) lightly.
Take off screw (3) change new upper knife (4).
Then, tighten screw (3) lightly.
Loosen screw (1) make sure lower knife (8) touch
upper knife closely.
Turning hand wheel till upper knife clamp reach
its lowest position. Then, adjusting the position
of upper knife and lower knife overlap by 0.5 mm
Tighten screw (3), (1).
Changing lower knife:
Loosen screw (1), push lower knife holder
(2) to left and then tighten screw (1)
lightly.
Loosen screw (9) take off old lower knife
(8) and change new lower knife.
Make sure the tip of lower knife line even
with the top of needle plate. Then, tighten
screw (9).
Loosen screw (1) make sure lower knife
touch upper knife (4) closely. Then,
tighten screw (1)
www.garudan.cz