Garudan GF-3131-447 MH, Руководство пользователя, Страница: 16 / 64

© ANITA
MP03100EN_180912 16
22. ADJUST THE THREAD HOOK
Casing thread (1) hook screw (2) is the standard
location in chassis line adjusting the center of the
range. See Fig. (19).
By moving to loosen the screw (2), the first to
adjust the position.
When sewing thick, to check the chassis line
moves to the left (line force will push big).
When sewing thin material. to check the chassis
line
moves to the right (pick line force will be
weakened).
23. ADJUST THE HEIGHT OF PRESS FOOT
When using presser foot wrench (2) ascension presser
foot (1), the standard of the presser foot hoisting height
is 6 mm. See Fig. (20).

Loosen the presser foot the adjustable screw (3) presser
bar and presser foot (1) up.

In the presser foot (1) gauge block of 6 mm thick.

To loosen screw height of presser foot (1) up and down
(4).

Tighten down the screw (4).
24. ADJUST THE HEIGHT OF THE FEED DOG

Maximum stitch, the largest feed (1) needle plate
above the 1.2 MM standard.

Loosen the screw (2) rotation carried the angle of
the forks (3), feed dog height can be adjusted. See
Fig. (21).
Figure 21
Figure 19
Figure 20
www.garudan.cz