1. This equipment must be assembled and checked by an adult.
2. Regularly check all nuts and bolts for tightness before use and replace any worn,
defective or missing parts. DO NOT try to repair broken parts.
3. Regularly check swing seat, ropes, steel tube, ground anchor and that the other parts
are tightened completely and replace worn & damaged parts when necessary.
If these checks are not carried out, this equipment could overturn or otherwise
become a hazard.
4. Remove worn and damage parts from use when necessary until replacement
parts are fitted.
5. Replace defective parts in accordance with the manufacturer's instructions.
6. At the beginning of each season, please oil all metallic move parts to maintain
and regularly oil when necessary during the usage season.
7. Swing set placement:
(a)
Place this equipment on a level surface at least 2 m from any structure
or obstruction. Such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
(b)
DO not install this equipment over concrete, asphalt or any other hard surface.
(c)
Place this equipment on a well-lighted area.
(d)
Do not use indoor.
8. Weather condition:
(a)
Swing seat should be kept dry. Do not use when these parts are wet.
(b)
Wind or air movement shall be calm and gentle.
(c)
Please do not use when directly facing the sun which may affect visibility or
change orientation to leave the sun behind.
9. This item is not designed for adults or maximum combined weight of 1 children not to
exceed 35 kg.
10. Please keep these instructions in a safe place for future reference.
11. Keep this equipment clean.
Page 6 of 6
CARE AND MAINTENANCE
