13
Operation
Before first Use
Take the sprayer out of the packaging and remove all packaging
materials. Store them in a safe place or dispose of them carefully; the
plastic bags might become deadly toys for small children.
According to factory-made functional tests, residual humidity can
remain in the unit. Residual humidity in a new article is not a fault.
Operation
1. To fill the tank, unscrew the handle
and remove it. Before first use, test the
pressure sprayer with clear water.
2. Mix concentrates in a separate
measuring cup prior to fill into the tank.
Add the necessary amount of water
and make sure not to overfill the tank.
Be careful while mixing, pouring and
handling chemicals. The tank capacity is 5 litres.
Make sure the mixture is completely dissolved and there are no dirt
particles or clumps. If so, the suction tube (8) and the nozzle (11)
and the strainer (12) inside the tank might become blocked.
3. Before operating the sprayer, make sure the handle is securely
screwed on.
4. Assemble the lance and the extension together. First adjust the
length of the lance according to application and then re-tighten both
parts together by using the screw cap.
5. Unlock the handle by turning
counter clockwise and lift up.
Start pumping with the handle
until you feel resistance.
6. Lock the handle in place and hold
the
pressure
sprayer
while
spraying by the handle or put the
shoulder belt (3) on your shoulder.